with integrated BCU
ETS product family: Physical sensors
Product type: Movement

Intended use

• Requirement-oriented control of lighting, room thermostats and other electrical loads in interior rooms
• Ceiling mounting on fixed ceilings in appliance box according to DIN 49073 or surface-mounted housing ref.-no.: PM-KAPPE-1 or PM-KAPPE AL-1

 
Product characteristics

• Integrated bus coupling unit
• 3 PIR sensors
• Detection field 360°
• Integrated brightness sensor
• Deployed as presence detector, motion detector, or for alert operation
• Output functions: Switching, staircase function, switching with forced position, value transmitter, light scene extension, operating mode setting for room temperature controller
• Extension of the detection area by way of operating several devices as main unit or extension unit
• Adjuster for manual adjustment of sensitivity
• Status LED: Flashes during motion detection; depending on programming in normal operation or only during the walking test mode

Additional characteristics of "Universal" version:

• Manual operation with IR remote control possible (ref.-no.: KNX PM FB IR)
• 5 function blocks for motion detection each with 2 outputs
• Function blocks switchable, e.g. for day/night operation
• PIR sensors can be evaluated separately
• Brightness sensor function with 3 limiting values
• Light control with max. 3 channels, setpoint shift in operation, separate configuration of dimming-up, control and dimming-down phase
• Light control can be combined with presence detector function

Presence detector function:

• Detection of the smallest motions e.g. at a workplace for detecting the presence of persons
• Switch on: Motion detection and brightness threshold not reached
• Switch off: No motion in the detection field and shut-off delay elapsed or brightness threshold exceeded

Motion detector function:

• Motion detection for passageways in buildings
• Switch on: Motion detection and brightness threshold not reached
• Switch off: No motion in the detection field and shut-off delay elapsed or brightness threshold exceeded

After reacting and switching on, the motion detection works independently of the brightness.

Signaling mode:

• Brightness-independent detection of motions in the detection field
• Switch on: After detection of an adjustable number of motions within the set monitoring period
• Switch off: No motion in the detection field and shut-off delay elapsed

Accessories:
protection cage ref.-no.: SK 180-90 WW

Accessories:
surface-mounted housing ref.-no.: PM-KAPPE-1, PM-KAPPE AL-1