Collection
IR remote control-KNX PM FB IR
for KNX presence detector universal ref.-no.: 3361-1 ..
for KNX presence detector mini universal ref.-no.: 3361-1 M ..
for KNX universal automatic switch ref.-no.: .. 3181-1 .., .. 3281-1
Battery operation with one inc
KNX presence detector universal-3361-1 WW-01
with integrated BCU
ETS product family: Physical sensors
Product Type: Movement
KNX presence detector standard-3361 WW-01
with integrated BCU
ETS product family: Physical sensors
Product Type: Movement
Surface mounting set-PMM-AP-SET-WW
for ceiling installation of KNX presence detector mini
Flush mounting set-PMM-UP-SET-WW
for ceiling installation of KNX presence detector mini
KNX brightness controller mini-2096 LUX-01
with integrated BCU
ETS product family: Physical sensors
Product type: Brightness
KNX presence detector mini universal-3361-1 M WW-01
with integrated BCU
ETS product family: Physical sensors
Product type: Movement
KNX presence detector mini-3361 M WW-01
with integrated BCU
ETS product family: Physical sensors
Product type: Movement
(Spare part)
for installation of the universal weather station, ref.-no.: 2225 WSU-01
KNX universal weather station-225 WS U-01
compact housing
including fastening arm and connection cable
ETS product family: Input
Product Type: Analogue input 4-gang
KNX analogue input, 4-gang-2214 REG A-01
Rail mounting device, 4 rail units
ETS product family: Input
Product type: Analogue input 4-gang
KNX area / line coupler-2142 REG-01
Rail mounting device, 2 rail units
ETS product family: System components
Product type: Line coupler
KNX IP Router-IPR 200 REG-01
Rail mounting device, 3 rail units
ETS product family: System components
Product type: IP router
LS990-4-channel BLE
including mounting plate, adhesive pad and fastening screw
LS990-2-channel BLE
including mounting plate, adhesive pad and fastening screw
A-Creation-2-channel BLE
including mounting plate, adhesive pad and fastening screw
2130USBREG-01
KNX USB data interface
Rail mounting device, 2 rail units
The USB data interface enables the coupling of a PC for the addressing, programming and diagnoses of KNX components. The power is fully supplied by the connected PC via the USB i
A-Creation-4-channel BLE
including mounting plate, adhesive pad and fastening screw